• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized possession from theft. It's discreet and doesn't require additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This will then allow the vehicle to start.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are looking to upgrade their security. There are many different types of aftermarket security devices that range from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your vehicle. While a tracking system may assist you in locating your vehicle in the event of theft, it does not stop the crime from occurring in the first place. Immobilisers, on the contrary does exactly what it says on the tin: it shuts down the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ghost device is able to create an exclusive sequence that has to be entered prior to the engine can start. This can be done using the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially beneficial if you have to surrender your car to a valet service or parking because the immobiliser will remain active and not deactivated.

The Ghost is an innovative and unique device that works with the buttons on your vehicle rather than as a standalone unit. This means it's not only a highly effective security measure against theft from your vehicle but also a transferable device over to any future cars you may have, making it more of an investment than the traditional lock on your steering wheel.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a high-tech security device that protects your vehicle from key cloning, hacking & ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be plugged into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices which is an approach used frequently by thieves to get around existing immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console, or door panels, to create a a unique disarming sequence. You can even create a sequence that is as long as 20 presses to provide additional security. The iPhone app is limited to one connection, using a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN has been entered. It is also possible to put it into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service for servicing without the need to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a specific code. The system can be turned on and off by using your smartphone's application without the need for wires.

The standard factory immobilisers work by using a transponder that is built into the key. It transmits a message to the ECU. The car will start if the correct code is sent. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognize it. This enables the vehicle to start and be stolen. The ghost 2 immobiliser fitting near me immobiliser was created by an South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning and even key theft. The only way thieves could steal your car is physically towing it away, and even then they would not be allowed to drive it.

Ghost makes use of buttons on your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to generate a unique PIN code that needs to be entered to use your car. This is performed without the need for additional hardware, such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals so thieves are not able to utilize sophisticated RF scanning or code-grabbing technology to discover that a security system has been installed.

bmw m3 ghost installer is harder to remove than car alarms that require disarming with the buttons. This makes it a fantastic complement to an GPS tracking device, which can be used to track your vehicle after it's been stolen.

Override of emergency PIN code

You don't have to look far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It creates an individual pin code push sequence from your existing buttons on the steering wheel, door panel, and the centre console. This unique PIN is entered alongside the original key fob to stop the engine from beginning. The unique override PIN can be found on the black card you will receive following your installation and is easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, which means it can't be identified by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to the tracker.

Unlike most other security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely with the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, however this must be stated prior to the installation of the device. They are also service/valet-mode compatible and a great alternative to a tracker when you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen without the owners keys. With the ease of access to key cloning equipment & door lock pick sets it is now much easier for thieves to take your pride and joy. We have developed the Autowatch Ghost immobiliser ghost to combat this. It stops your vehicle from being driven even if you keys have been copied.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or keys fobs. This means that it can't be detected by diagnostics or any other car hacking devices. It also stops you from introducing the new ECU or key to circumvent the system, because only the PIN number allows the engine to be started.

The device is concealed inside your car using existing buttons on the steering wheel, centre console and door panels. Before you can begin your car, you need to enter a unique and changeable PIN number that is up to 20 digits.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car from being driven away or started without a PIN code being entered prior to. If the device is in armed and you try to drive away, it will display a warning on your dash that will flash regularly for around 300m, if you enter your PIN code at this point, it will deactivate the anti-hijack and your car will continue to drive as normal. If you don't enter your PIN at this point, the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.