로고

우리동네공사신고(우공신)
관리자 로그인 회원가입
  • 자유게시판
  • 자유게시판

    우공신에서 제공하는 다양한 혜택들 놓치지 마세요!

    자유게시판

    Guide To Ghost 2 Immobiliser Installation: The Intermediate Guide For …

    페이지 정보

    profile_image
    작성자 Christena Deaco…
    댓글 0건 조회 5회 작성일 24-10-18 14:38

    본문

    Autowatch Ghost II Immobiliser Installation

    310762719_174097598533869_2015889089625884380_nlow.jpgGhost immobilisers are the newest technology in vehicle security. They are revolutionary in that they shield your vehicle from key-cloning and hacking.

    The system requires the correct PIN code in order how to become a ghost immobiliser installer start your car. This is done by pressing the buttons on the dashboard or steering wheel.

    TASSA Approved

    The TASSA-certified ford focus ghost installer-II CAN from Autowatch is an innovative device that is designed to tackle the latest car crime trends, including key cloning, hacking and other forms of theft. This sophisticated system can connect directly to your vehicle's CAN data network, which prevents your vehicle from being driven or started without the proper code. The system is undetectable, and does not use radio frequencies or key fobs. Instead, it lets you to create your own unique sequence of PINs using buttons on your dashboard or steering wheel, which you are able to alter at any time. You can make the PIN as long as 20 presses long to ensure maximum security. an emergency code that is secure is provided too.

    The system works by communicating with the vehicles CAN data network in order to detect when a specific PIN is entered. It then sends a signal back to the vehicle which disables the engine and ignition and shuts down crucial components like the starter motor and fuel pump. The system also offers a 'valet mode', that allows you to turn off the system and prevent your car from being driven by valets or service centre personnel without the correct keys.

    Contrary to conventional immobiliser relays which can be disabled with easily accessible diagnostic tools for professionals and tools, the Ghost device uses the onboard data network to communicate with the ECU and is not able to be tampered with. It's a sealed device and therefore, it is impossible to listen in to the circuits. This makes it nearly impossible for thieves to hear that distinctive click sound that traditional immobiliser relays make.

    This technology is not susceptible to jamming devices used by high-tech thefts and is not detected by any other diagnostic tool because it uses the CAN data networks. This means it's an ideal anti-theft solution for every modern vehicle.

    We will visit your office or home to complete the installation after you have booked the installation. We'll go through a complete demonstration with you, and then supply the owner's manual as well as an emergency card as well as two Autowatch window stickers, and an installation certificate.

    Insurance Approved

    The Ghost is a security gadget that is installed aftermarket and protects you from the kinds of thieves interested in stealing vehicles. It prevents your engine from starting until certain buttons are hit. The only person to know the sequence is you. If your car is stolen, thieves won't be able start it and leave your vehicle alone out of fear. The ghost also comes with a silent mode that will shut down the vehicle if it is not being used and can be turned off by the push of a button.

    The system is fully TASSA-approved, which means that some insurance companies will recognize it as an extra security measure for your vehicle. It can be used alongside other Thatcham-approved security measures, such as trackers to help protect your vehicle from being taken. This gives you security.

    The system also communicates with the ECU of your vehicle via the CAN data loop which is completely inaudible to diagnostic tools. This means a thief cannot simply change a key or change the ECU to disable the Ghost. The system will only start your vehicle if you enter the correct pin code. The pin code you enter is only known by you and is able to be changed at anytime.

    The Ghost is a highly discreet immobiliser that can be added to most vehicles without the need for wiring or the addition of aftermarket key fobs. It is directly linked to the vehicle's CAN data network, and a PIN code is programmed by pressing the buttons on the dashboard or steering wheel. This code will prevent the vehicle from being started unless the correct sequence of events has been selected first. If the code is guessed it is possible to use secure emergency codes which can be reset with your mobile phone. There is an application that can be used on iOS and Android to decrease the requirement to enter pins each time, giving greater security.

    Distinction

    An immobiliser, unlike a GPS tracker that only helps you locate your car after it's been stolen, prevents the vehicle from ever being stolen in the first in the first place. This is done by preventing the engine from running until it is given the correct code through the key fob, or a smartphone app that is downloaded to it. This is the best method to avoid wheel jacking and other thefts since the criminal will be forced to leave your car in peace or risk being arrested.

    The ghost immobiliser is a weatherproof, tiny device that is fitted inside the wiring harness in your vehicle. It is concealed and connects to the CAN data network. This means that thieves cannot identify it or disable it by cutting wires. The system also has a service mode which can be turned on to allow your garage to work on your vehicle without needing to know the passcode required for it to start.

    Once the device has been installed in your vehicle, it can be de-armed and armed with an app on your smartphone. You can change the PIN number whenever you'd like to ensure you are the only one who has access to your vehicle. This is beneficial if you intend to sell your vehicle in the near future, as it can increase its resale value.

    Another advantage of the ghost installer immobiliser is that it's discrete and won't leave any marks on the internal car's body, making it an ideal option for any vehicle. It's simple to install and operates quietly, and won't interfere with any other systems in your car.

    An immobiliser that is discreet will improve the look and feel your vehicle. This can be especially attractive for those who frequently utilize their vehicles to transport valuable items, since it can deter any potential thieves from targeting them. Ghost immobiliser works in conjunction with other anti-theft systems like trackers to provide unparalleled protection for your vehicle.

    Low Maintenance

    A Ghost immobiliser connects directly to the CAN data network. It is almost undetectable as it doesn't use any LED indicators or extra key fobs. It doesn't emit radio signals, and it's also silent so thieves can't detect it. It can be hidden in a variety of locations (even underneath the floor mats) and is an excellent option for those who want to protect their car without compromising on aesthetics.

    This device blocks your car from starting unless you enter a password that is unique to you. This is done by pressing a series of buttons on your dashboard and steering wheels in a certain sequence. This will prevent thieves from hacking into your system and stop them from starting the vehicle.

    The Ghost will be alerted to boost your signal and prevent your car from starting until the proper disarming code is entered. The Ghost is different from other security systems that can be activated with the incorrect code. It will keep preventing your car from starting until you enter the correct passcode.

    The Ghost remains in "service mode' until you activate it by pressing the same set of buttons you used to arm it (this can be done when you visit your dealer to perform maintenance or warranty work). This is a precaution to ensure that it is not removed by unauthorised persons and is rearmed and returned to service mode when it is required.

    If you decide to change vehicles in your ownership it is possible to transfer the bmw m3 ghost installer to the new vehicle, provided that the new vehicle is compatible. The latest ford fiesta ghost installer 2 immobiliser installation - updated blog post - also comes with QR finger print stickers that are linked to the International Security Register, meaning that in the event that your Ghost is stolen for parts it can be traced back to you and your vehicle. This can discourage thieves from stealing cars fitted with Ghost since they'll be aware that the vehicle is secured and they would be risking being caught and convicted.

    댓글목록

    등록된 댓글이 없습니다.

    HOME
    카톡상담
    서비스신청
    우공신블로그