• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or a Subaru dealer, depending on how old your Subaru is. This is accomplished by connecting a computer machine to your car.

To program your Subaru, unlock the driver's door by pressing the door button and then close it. You will hear a chime in the instrument panel and the dome lights will light up.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your key fob. The first step is to know which kind of key fob you own. You can do this by studying the shape of the key fob or by listening to the Car key remote replacement's chime.

Once you have these details, you are able to start the process of programming your key fob at home. To do this, you will require a key made of steel and a screwdriver with a flat head. The key fob case can be opened by twisting it. Insert the key made of metal into the case and let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2 Step 2: Unscrew your Key Fob Case

Changing the battery is a good idea because it could revive key fobs that aren't functioning for a while. However, there are cases where the buttons in the key fob could be broken. If you are able to see that the button's contacts made of metal have come loose, you can try soldering them back in place in order to make them function again.

Before you begin the process, ensure that the doors of your car are shut and that your ignition is turned off. You can accomplish this by closing the driver's door and pressing your door button ten times in rapid succession. After that, you'll hear the instrument panel chime and your dome lights will flash. This indicates you're now ready to proceed.

Step 3: Insert the Key Fob in the ignition

There are lots of articles online that give you steps on how to program subaru key to program a replacement key subaru or new subaru forester replacement key cost key fob at home, but they are not particularly specific. Programming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors closed. Use the door button to open all the doors. Close and open the driver's door two more times. Insert and remove the ignition key (don't turn it) 10 times over 40 seconds. The system should sound chirps to confirm that the settings have changed.

Step 4: Turn the ignition On

Before you begin this process of key fob programming, it is crucial to know that this procedure only works with a functioning key already. If you do not then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once the key has been programmed, it will be capable of starting your car in about 5 seconds. Start by closing all doors, then turning off the engine. Sit in the driver's chair and unlock all the doors by pressing the door button. Insert the key in the ignition and then turn it to the first position. The electrical systems will be activated, however the engine will remain in neutral. Repeat this procedure 10 times.

Step 5: Unlock the Driver's Door

Subaru offers a variety of high-end cars with key fobs, which can lock and unlock doors and even start the car and defrost the windows. These devices may stop functioning.

To resolve this issue then you should contact an expert locksmith or dealer. This will fix the problem and ensure that your car is safe.

First, you must open and close the driver's door. Then, put the ignition key and turn it to the first position. Then, you can turn it back to the off position. Repeat this 10 times in one row as fast as possible. After ten times, you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

If you're looking to change the battery in the Subaru key fob, the procedure is simple. First, open the exterior fob casing. Use a flathead for prying the case's interior open and take out the old batteries.

After removing the battery to replace it, you can replace it with the new one. Close the case. Next, sit in the driver's seat, and unlock all doors using the door button control. After that, put the key in the ignition and turn it to ensure that the electrical systems are on but the engine is off. Repeat this 10 times until you hear a sound on the instrument panel. This will turn the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoyance noise that occurs when locking and unlocking the Subaru key fob from outside the vehicle could be distracting. In certain instances, you can disable the chirp by closing and opening all doors by double-clicking on the lock button on the key fob.

Close all doors including the lid that holds the fuel, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that the instrument panel emits an audible chime. The chime signifies that the fuel-filler lid and door lid are locked. The setting can be changed to make the lids and doors lock automatically without pressing the request switch.

Step 8: Enter the 8-Digit Transmission Number.

Keep the first 8 digits of the code in your head. Now, get in your driver's chair, close all doors and turn the ignition to the first position (towards on). After 10 turns, your instrument panel should begin to sound once.

The transmitter circuit board is located inside the key fob case. There will be two or three sets of numbers (8-digits) on the circuit board. Note the first number sequence and follow the steps in this guide to register the code on your vehicle's system. This process may require visiting the dealer for older models.